NewsHome > News
ASTM A335 P22 Seamless Pipe High-Temperature Steam Lines
ASTM A335 P22 is a seamless ferritic alloy steel pipe intended for high-temperature service. Its chemistry is the classic 2.25Cr–1Mo recipe: nominally 1.90–2.60% chromium and 0.87–1.13% molybdenum, with carbon held between 0.05% and 0.15%. For decades this grade has been a benchmark in ASME boiler and pressure-piping codes, and it remains one of the most requested Cr–Mo grades for power plants and refineries.
Ordinary carbon steel such as A106 Gr.B loses strength quickly above about 425°C. The chromium in A335 P22 forms a stable, adherent oxide film that slows high-temperature oxidation, while molybdenum strengthens the ferritic matrix so the pipe retains useful creep strength in the 450–550°C range. Creep resistance — the ability to resist slow, permanent deformation under sustained load at temperature — is the key property here, and it is exactly what carbon steel cannot provide. That combination is why P22 is a common choice for superheaters, reheaters and main steam lines, where metal temperature stays high for tens of thousands of operating hours.
A335 P22 is supplied normalized and tempered. After heat treatment, the standard requires a minimum tensile strength of 415 MPa and a minimum yield strength of 205 MPa. The tempering step relieves stress and stabilizes the microstructure, which directly supports long-term creep performance. In power-plant practice, properly heat-treated A335 P22 serves continuously at metal temperatures up to about 560°C.
Typical duties include:
·Boiler tubes, superheater headers and main steam piping in thermal power plants
·Refinery furnace coils and high-pressure steam systems
·Petrochemical lines in hydrogen and reformer service
Compared with A335 P11 (1.25Cr–0.5Mo), P22 offers higher creep strength; compared with P91 (9Cr–1Mo), it is more economical and generally easier to weld for medium-to-high temperature duties. Because P22 has been in service for decades, its welding procedures and post-weld heat treatment schedules are well established in industry codes, which lowers qualification risk for contractors. Selecting the right alloy level is a cost decision as much as a technical one, and the design temperature should make that call.
We supply A335 P22 seamless pipe from OD 10.3 mm to 965.2 mm, wall thickness 1.0–60 mm, in custom lengths cut to your drawing. Every heat ships with an EN 10204 3.1 or 3.2 mill test certificate, and third-party inspection by SGS, BV or TUV can be booked before loading. Hydrostatic testing, ultrasonic examination and PMI reports are available for refinery and power-plant projects.
If your project involves boilers, steam lines or high-temperature process piping, send us the size, wall thickness and design temperature. Our engineers will confirm whether A335 P22 or another Cr–Mo grade fits your duty, and we will reply with a quotation and full certification details.
WE PROVIDE
- GB/T9711-2011 PSL1 LSAW Pipeline
- GB/T9711-2011 PSL2 LSAW Pipeline
- ISO3183 PSL1 LSAW Pipeline
- ISO3183 PSL2 LSAW Pipeline
- API 5L PSL1 LSAW Pipeline
- API 5L PSL2 LSAW Pipeline
- EN10219 LSAW Pipeline
- ASTM A671 LSAW Pipeline
- ASTM A672 LSAW Pipeline
- ASTM A252 Welded and Seamless steel pipe piles
- ASTM A53 Welded and seamless steel pipe
- GB/T3091-2008 welded steel pipes for low pressure
- GB/T13793-2008 LSAW Pipeline




